For 38 years, EiKO Global, LLC has delivered the industry's best lighting products. Carrying over 5,000 SKUs and the broadest selection of any manufacturer in its class, EiKO is committed to providing innovative products, unique solutions and unmatched support to its customers.
Eiko has numerous offerings from LED G4 all the way through to LED Cobra Street Light Heads. Check them out on our website (www.shadowlighting.ca) or at www.eiko.com. If you have any questions please don't hesitate to ask.
Light Flux – Lumen (lm)It is the total quantity of light emitted in all directions. It is measured by placing the light source at the center of an integrating sphere and is relevant for non-directional sources such as A type or when comparing two directional sources with different beam angles.
Light intensity – Center Beam Candela Power (CBCP) or Candela (cd)
The brightest point in the beam, usually at the center. To measure light intensity, the light source is placed inside a goniophotometer and rotated 180° to measure the light distribution and determine the brightest point. It is relevant for directional lighting such as PAR or MR16 types but must be used in correlation with the beam angle. It is also sometimes called MBCP (Maximum Beam Candela Power).
Beam angle – Degree (°)
The angle of the light emitted by the source. It is the angle passed which the goniophotometer measured intensity is below 50% of the maximum (Full Width at Half Maximum). Different applications will require different beam angles usually classified as Spot (SP), Narrow Flood (NF), Flood (FL), and Wide Flood (WF). It is relevant for directional lighting such as PAR and MR type. The wider the beam angle, the lower the light intensity but the larger the lighted surface area.
Color Temperature – Degree Kelvin (K)
The color appearance of the light. This is measured in the integrating sphere, which analyzes the emitting wavelength to determine the color temperature. Incandescent and Halogen sources have a Warm White color temperature of 2700K while fluorescent and LED are available in all colors of light such as Warm White (2700K-3000K), Natural White (4000K) and Day Light (6500K).
For hospitality and F&B lighting applications, we recommend Warm White to reproduce the home comfort feeling. For retail lighting application both Warm White and Natural White are suitable. Day Light color temperature is only used in office lighting and working environment applications where focus and productivity is most important.
Furthermore, LED lighting output improves as color temperature is increased. The same LED will have a greater lighting output at 6500K than 3000K, which is why it is important to consider color temperature when comparing two LED sources.
Illuminance – Footcandles (fc) or Lux (lx)
The measure of the luminous flux density falling on a surface. Footcandles or Lux levels are tested in the goniophotometer or with a lux meter. The results can be displayed on a graph showing the illuminance level at each distance of the light source as well as the lighted area. It is used to determine the type and number of sources necessary to reach a certain illuminance target in an application. The lux levels for every project are determined by many factors, most importantly the intended use of the environment. For instance, an office illuminance requirements will be higher than a hotel room.
Color Reproduction – Color Rendering Index (CRI or Ra)
CRI measures the ability of a light source to accurately reproduce colors and is measured on a scale from 0 to 100. Natural light has a CRI of 100 and is what all light sources strive to replicate (left picture). A CRI of 65 is considered poor (right picture) while a CRI of 80 is considered good. Halogen and Incandescent sources have CRIs close to 100 while fluorescent sources are usually around 80. ENERGY STAR requires a CRI of 80 for integral LED lamps.
CRI for LED lamps is measured in an integrated sphere which analyzes the chromatic effect of the light source over a scale of 14 standard colors (R1-R14). After testing, each color receives a value. The actual CRI number is derived from taking an average of the values assigned to R1-R8.
Although the R9-R14 values are measured, they have no impact on a product’s CRI rating. R9 includes reds associated with things like food, clothing, and even skin tones. For commercial lighting, it is important to consider an LED’s CRI as well as the R9 value, especially in places like supermarkets, clothing stores, and other places where reds are prominent colors.
Retrofitting halogen or incandescent sources with a more efficient and longer lasting LED solution is not only an eco-friendly statement but a sound business decision as well. Here is an example of a small retail shop that replaced 30 of their 120W PAR38 halogen lamps with GREEN CREATIVE’s TITANIUM LED SERIES 3.0 19W PAR 38 lamps. Switching just 30 lamps resulted in annual energy savings of $2,336.
In 5 years, GREEN CREATIVE’s PAR38 19W LED retrofit lamps will help save more than $10,300 in energy and maintenance costs. In addition, these low wattage lamps emit less heat, creating even more energy savings through lower air conditioning costs. The return on investment for this retrofit project takes less than 8 months to recover. If local utility rebates are taken into account, the ROI period will be even shorter